Accessories are easily accommodated by the flexible design of the front plate of LS series sources. The LS faceplate accepts all Abet accessories as well as any 1.035-40 thread optics cells and 30 mm cage system components directly. C-mount and Newport-Oriel flange based accessories are accommodated with inexpensive adapters.
 [1] |
Manual Filter Wheel
This is a six-position manual filter wheel for 1-inch diameter (25 mm), up to 3 mm thick optics. Use our 20043 or 20044 1” cells to accommodate thicker optics. The wheel can be used like a microscope turret. With a selection of focusing condensers loaded different spot sizes and irradiance level spots can be produced. |
| Model |
Description |
Price |
| 20065 |
Manual Filter Wheel |
$255.00 |
 |
Focusing Condensers
These condensers are 1 inch (25 mm) diameter UV grade Fused Silica lenses mounted in a cell that screws right into the output face of our LS source or into the 20065 filter wheel. |
| Model |
Description |
Price |
| 20052 |
F/1.0 UV Grade Fused Silica Condenser |
$220.00 |
| 20053 |
F/2.0 UV Grade Fused Silica Condenser |
$185.00 |
| 20055 |
F/4.0 UV Grade Fused Silica Condenser |
$168.00 |
Other focal length condensers are available please contact us for information and pricing.
 |
90Degree Beam Turner
These mounts allow a beam to be turned by 90 degrees, without any vignetting, with a mirror, or to provide wavelength separation when equipped with a dichroic reflector. The output faces are also equipped with 4-40 tapped holes for a 30 mm cage system. These reflector mounts can also be attached to each other for additional filtering. |
| Model |
Description |
Price |
| 20034 |
90° Beam Turner with no optics |
$288.00 |
| 20037 |
90° Beam Turner with a full reflector |
$325.00 |
| 20035 |
90° Beam Turner with UV 280-400 nm reflector |
$425.00 |
Mirrors for other spectral regions are available. Please contact us for information and pricing.
 |
#20032 Adapter
The #20032 adapter is used to mount Oriel 1.5 inch series flange components to the face plate of LS sources |
| Model |
Description |
Price |
| 20032 |
Flange Adapter |
$72.00 |
 |
#20033 Adapter
The #20033 adapter is used to mount standard C-mount accessories to LS series sources. |
| Model |
Description |
Price |
| 20033 |
C-Mount Adapter |
$47.00 |
|
Adapters
The 20043 and 20044 1.035-40 threaded 1 inch cells are used to mount optics to the output face of the LS-150 source or the 20065 filter wheel. |
| Model |
Description |
Price |
| 20043 |
1 Inch Optics Mounting Cell for optics up to 7.5 mm thick |
$89.00 |
| 20044 |
1 inch Optics Mounting Cell for optics up to 12.7 mm thick |
$72.00 |